Starting a CLT logger

SEE ALL TOPICS
CLOSE
The Guide logo
Your Account

ON THIS PAGE

Start your logger

The logger is switched off when you get it

Loggers have a raised power button on the front.

To start the logger, press and hold the power button for approximately 5 seconds until the IN USE light comes on. Release the power button.

The IN USE light will not stay on.

To check that the logger is running, keep watching the IN USE light. It will flash briefly every 10 seconds when the logger is recording. It can be quite hard to see unless you are looking at the logger straight on.

Clever-Logger-CLT-01-power-button
Press and hold the power button for 5‑6 seconds

Turning the logger off

Clever Logger CLT-01 loggers sold after about 2021 cannot be turned off once they are running. This is by design, to avoid the logger accidentally being turned off and not able to record data.

For these loggers, the only way to turn the logger off is to open it and remove the battery. This will cause an offline alarm, so you will want to disable the alarm in the dashboard if you are planning this.

With older loggers, it is possible to turn the logger off by pressing and holding the power button for 5‑6 seconds.

What happens when you press and hold the power button for old the power button for 5‑6 seconds?

If nothing happens, you have a newer logger that can’t be turned off.

If the IN USE light flashes five times, the logger is now turned off.  You will need to press and hold the power button again to turn it back on.

30-DAY FREE TRIAL

You're going to love Clever Logger

To prove it, we’ll send you a Starter Kit to try out for a whole month.

Set it up, have a play, explore the features – obligation free.

If you love it, just let us know.

If not, just send it back.

Location Views

In the top right corner of the Location page, you will find the View chooser.

There are three options: Simple, Detailed and Gauge.

change-location-view

Simple View

Detailed View

Gauge View